Comments within...
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Tim, a couple of questions come to mind.
1.) Are you trying to tune a T-band Duplexer down to
440? Not reccomended.
No I am not trying to make it go to ham band. I maintain a private tband
repeater.
2.) Are you running a circulator between the duplexer
and the antenna?
It would between the TX and the duplexer, but I know what you meant. And I
am not running one.
3.) Are you using the same cables out of the repeater
to connect to the duplexer (either one) and seeing a
change?
Not sure what you mean here. I took my test cable from the output of the
transmitter and measured 42 watts. Then I hooked the cable from the
transmitter to the duplexer input. Next I took my measurement from the
duplexer antenna port.
So, if your asking did I take a measurement through the cable from the pa to
the duplexer no. I should have.
Thanks for the input Barry.
-Tim
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
