It is using a seperate power supply from the controller, a RS 1 Amp 
walwart type supply.  Does not appear to be abnormally warm.

Mathew
W9MWQ


> Could be "dirty power" caused by excessive ripple on the supply, a 
bad
> connection, or some other type of noise riding in on the +12VDC.
> 
> Chuck
> WB2EDV
> 
> 
> 
> ----- Original Message ----- 
> From: "w9mwq" <[EMAIL PROTECTED]>
> To: <[email protected]>
> Sent: Friday, October 08, 2004 8:56 PM
> Subject: [Repeater-Builder] RLC2 Controller Help Needed: It likes 
to reset
> itself
> 
> 
> >
> >
> > I'm having an issue with my RLC2 controller, hope someone can 
shed a
> > bit of light for a fix or remedy. Has now happened three times,
> > first time was a few months back, the last two times was this 
week.
> > WHat it does is goes into some sort of havac mode, cannot be
> > accessed with the computer, will not repeat, and just keeps
> > triggering the relay on the controller. I have to do a complete
> > system reset in order for it to come out of it. Any ideas as to
> > what is happening? Thanks for the help.
> >
> > Mathew
> > w9mwq
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >







 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Reply via email to