BTW the cans are WP-641's
Neal Newman wrote:
>Second Posting waiting reply
>
>
>Hey Guys.. I am having a problem with My Wacom Cans... I am just
>Courious
>what should the Length be for the 4 jumpers.. the 2 between the cans
>and the 2 that meet at the
>output Tee..... the repeater is on 145.230
>and what type cable should Be used ( I think its RG-213) I noticed that
>One cable is
>teflon... and 2 seem longer than the other 2..
>I took Measurements.... the jumpers between the cans measure 8.5" and
>8.75"
>the 2 jumpers between the cans and the output Tee Measure 11.77" and
>13.5 "(teflon)
>I know this is not correct... Serves me right for loaning out the cans
>to friends club for a few years.
>For some reason I always thought all 4 cables should be about 13" but
>I may be wrong...
>Does anyone know the Correct length
>BTW I measured tip to tip of the pl-259's
>
>
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
