re: ts-32 mods
R12 looks like the high side (voltage divider)
level injected into the detector ring".
Resistor R19 looks like part of a precision
rectifier, used as a tone/bridge match
detector. The first impression is that it's
part of the hysteresis or dead band detection.
The only way to really know if these mods do
anything regarding speed, would be to measure
the before and after. One would imagine the
factory defaults would be pretty darn fast.
Cheers,
Skipp
www.radiowrench.com
> "Chuck Kelsey" <[EMAIL PROTECTED]> wrote:
> Recently someone posted a modification to the TS-32 tone
encoder/decoder
> which would result in faster decode time. This same info is on the
Repeater
> Builder site.
>
> However, I have a conflict between the Communications Specialists
parts list
> and the information provided on the Repeater Builder site.
>
> My spec sheet says that R-12 is 150K and that R-19 is 220K.
>
> The modification calls for:
>
> R-12 (110K) to change to 80 K or 100K
> R-19 (150K) to change to 220K or 270K
>
> Can anyone clarify this information?
>
> Chuck
> WB2EDV
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
