At 08:30 PM 10/23/2004 -0400, you wrote: >When an inquiry is done and the controller responds with, in your case, >146.520 the remote will be placed on 146.520. Also if a reset command is >sent to the controller it will also place the remote on the default >frequency. I use a Link Communications RLC-3.
<---Thanks for the info. I was more concerned with how the RBI-1 treats the radio when the reset button is pressed on the back of the RBI-1. From what I've seen, the RBI-1 simply reads what is currently "in" the radio and syncs to that. It doesn't actually set the radio to some default value. I just wanted to make sure I was seeing the proper behavior on an otherwise untested RBI-1. Ken ------------------------------------------------------------------------------ President and CTO - Arcom Communications Makers of state-of-the-art repeater controllers and accessories. http://www.ah6le.net/arcom/index.html We now offer complete Kenwood TKR repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
