http://www.norbysoft.com/acc/rc85manual.pdf
See Appendix A, pp. A-2, or page 108 of this pdf file.
Link 1 Band Select = (Link Prefix) 1 4
{If the Link Prefix is 7, then you would enter 7 1 4 to make Link 1 =
440.}
Link 2 Band Select = (Link Prefix) 4 3
{If the Link Prefix is 7, then you would enter 7 4 3 to make Link 2 =
220.}
Don't forget to save your macro after making the changes. You may also wish
to implement the changes for, and save them in, each macro.
73,
Steve
----- Original Message -----
From: "Chris Peterson" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Saturday, November 13, 2004 1:54 PM
Subject: [Repeater-Builder] need help with RC-85 and FC-900
> All,
>
> I'm looking through manuals trying to find this, but II'm having trouble
so
> I hope someone can help. Here's what I need to do.
>
> 1. Currently, the RC-85 is set up for a 220 module on link 1. I need to
> change this to a 440 module. What codes do I need to enter to do this.
>
> 2. I need to set up link 2 for the 220 module. What codes do this?
>
> 3. What is the code to swap link 1 and 2?
>
> Thanks,
> Chris, KG0BP
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
