I remember working on these in the '70s for remote feeds for local radio stations. All those screws do is adjust the various frequency losses to make the cable work equally poor at all frequencies. You end up with an attenuated signal, but relatively flat at the desired frequency range.
I did a Google and found some info. Look at this thread: http://www.broadcast.net/pipermail/radio-tech/2001-April/099104.html There is a good discussion on WE equalizers, it might help. Joe --- Al Wolfe <[EMAIL PROTECTED]> wrote: > > Thanks, Joe for your response. This unit mounts > on the wall in about a > 9 inch by 9 inch by 3 inch box. Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
