At 07:29 AM 11/22/04, you wrote:
>Hello Kevin & all on the list:
>
> I remember some comments about micor low band base/repeater stations
> that besides the band specific components (exciter filters limiter etc)
> that the back-boards and components were different from those of the VHF
> & VHF stations and that if I'm going to build a 6 meter repeater to look
> for a low band station (25-50 Meg) to start with.
>
>Comments Please
>
>Bob kd6gnb
The only thing I am aware of is that the location of the
channel elements on the RX is different between
the various bands. Maybe the TX as well, I forget.
A number of years ago I had to modify the RX
chassis by drilling out the rivets and removing the
channel element hold-down bracket before I could
swap a different band RX board into the chassis.
I think it was a highband board into a low band
second RX chassis....
The element tie-down is not that important in
a base station environment... so drill out the rivets
if you need to and go for it.
Mike
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
