Hello there, 

I'm looking for some help with a UHF Decibel 
Products DB4076W Duplexer, in specific the 
coax cable lengths if one of you can measure 
and provide them from your same model unit. 

This duplexer is Decibel's round UHF BpBr "four 
bottle" assembly, the suffix -004 (dash no) is 
for standard 450-470 Mhz operation. 

I received this duplexer less (missing) the two 
center to the N tee coax jumpers. The jumpers 
between the bottles are still in place and not 
the same length. Decibel assigns letters to each 
jumper, which correspond to a part number.  The 
coax is the classic (tan/brown in colour) PTFE 
(Teflon) (high quality) type. 

There are various methods to measure the coax 
cable lengths. Some people use the coax length 
plus 1/2 inch for the connector. Some people use 
the connector "tip to tip" (yes even with N 
connectors). It doesn't matter to me which 
method you use. All I ask is that you please 
tell me which method you use in your reply.

Using the tip to tip method, the High-pass, 
notch low side jumper (between the two 
high pass bottles), is ~ 6 inches long and 
has the Decibel Part Number of 048350-032 

The Low-pass, notch high side jumper (between 
the two low pass bottles) is ~ 12 inches long 
and has the Decibel Part Number of 048350-010 

The limited Decibel paperwork (I have here) shows 
the jumper from the Low-pass, notch high bottle 
to the N tee connector has the same part number 
as just above.  So half the battle is won. 

What I need is the length of jumper from the 
High-pass, notch low bottle to the N tee 
connector. Decibel's part number for this item 
is 048350-001 

Can any of you help?  Is there a method to 
convert Decibels part number scheme to a length 
value?  

I understand there are various methods to make 
your own duplexer cables. I've found these type 
Decibel Duplexers work better with the original 
manufactures cable length value in place. If 
you can help, I'd appreciate it very much.  

My files have many recorded mfgrs cable length 
values (which are available to anyone who needs 
the information), just not this one Decibel 
Duplexer Model (yet).  Again thanks, please 
reply direct or with a follow up post. 

Cheers, 
skipp  

skipp025 at yahoo.com  







 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Reply via email to