Hello all, The cost of new PL-259 connectors to fit this is so cheap that it would be best to just buy new. If you need a suppler contact me off line [EMAIL PROTECTED] and I will pass it along to you. Very best of 73, Russ, W3CH
----- Original Message ----- From: "Gerald Pelnar" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, November 29, 2004 12:40 AM Subject: Re: [Repeater-Builder] Coax Question > > I got several 25 foot pieces of 3/8" heliax I wanted to cut up and use for > jumpers. What are my chances of getting a PL259 soldered on to it? I guess I > could have tried it before I posted, but someone might save me the trouble. > > Gerald > > ----- Original Message ----- > From: "Mathew Quaife" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Sunday, November 28, 2004 11:43 > Subject: Re: [Repeater-Builder] Coax Question > > > > > > Look on ebay, there is a guy selling 1/4" hardline for very cheap. Also a > > PL259 will solder right on it. To get the ground soldered, don't worry > > about the wholes in the middel of the connector, but rather solder at the > > end of connector to the outer conductor. > > > > Mathew > > > > > > > > > Yahoo! Groups Links > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
