Look around for some of the CES phone patches, they are going very cheap and make a great controller and have built in ID-ers and all. Got a few of them now for under $50.00 bucks a piece.
Mathew > > We also use the ID-8 from Comm-Spec on some of our off site receivers and it > works very well for us! > 73 Russ, W3CH > > ----- Original Message ----- > From: "Rod Lane" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Monday, November 29, 2004 1:03 AM > Subject: RE: [Repeater-Builder] Remote receiver > > > > > > Check out the CommSpec ID-8. It has an inhibit line that you could feed > > from COR so it won't ID during a signal into the receiver. You'll need > > to drop the PL encode during ID. > > > > Good Luck. > > > > Rod N1FNE > > > > > > -----Original Message----- > > From: wb8art [mailto:[EMAIL PROTECTED] > > Sent: Sunday, November 28, 2004 10:24 PM > > To: [email protected] > > Subject: [Repeater-Builder] Remote receiver > > > > > > > > > > I wonder if anyone has a simple controller for a remote receiver. I > > have put a 2 mtr receiver in with a UHF TX in a MVP package. I need > > it to ID and switch PL when ID'ng so as to ID only in off time. > > Thoughts and suggestions would be appreciated. > > > > Randy WB8ART > > > > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
