Jeff & Kevin, Jeff , you hit the nail on the head! I just found out that "this strip" that I'm installing in a Spectra Tac Housing did in fact come out of a mobile! Like I said in the earlier email, it just didn't look like someone removed the shield. I have completed it's re-crystal and tune up and it seems to work perfect. (about -116dbm for 12db sinad).
Hopefully it will work just as well on the mountain but if it doesn't, I now know where to look. Thanks alot guys.....you learn something new everyday. Adam N2ACF ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, December 06, 2004 10:02 AM Subject: RE: [Repeater-Builder] Micor RX Strip TLE8032A Shield Missing?? > > I think you're describing the difference between a UHF Micor receiver > that came out of station versus one from a mobile. On the station > receivers, there is an extra shield on the solder side of the board that > covers up the area around the LO multiplier chain. Unless you have a > problem related to LO leakage causing you problems somewhere else, it's > probably no big deal. > > --- Jeff > > > -----Original Message----- > From: Kevin Custer [mailto:[EMAIL PROTECTED] > Sent: Sunday, December 05, 2004 1:31 PM > To: [email protected] > Subject: Re: [Repeater-Builder] Micor RX Strip TLE8032A Shield Missing?? > > > Adam C. Feuer wrote: > > > Hello Kevin & All, > > I have a Micor RX Strip model TLE8032A and noticed that a shield is > missing from being installed over the multiplier coils. I could have > sworn that another RX strip that I had (now in service on a mountain) > had that shield. It does NOT appear to have been removed but never > installed at the factory. > > Has anyone else seen this before? Also, will there be any difference in > performance? > > > All shields must be in place for the stages to have isolation and tune > properly. Can you take a picture of the receiver and send it to me? > I have many spare shields and will offer to give you the one you need. > > Kevin > > > > > > > > > _____ > > Yahoo! Groups Links > > > * To visit your group on the web, go to: > HYPERLINK > "http://groups.yahoo.com/group/Repeater-Builder/"http://groups.yahoo.com > /group/Repeater-Builder/ > > > * To unsubscribe from this group, send an email to: > HYPERLINK > "mailto:[EMAIL PROTECTED] > "[EMAIL PROTECTED] > > > * Your use of Yahoo! Groups is subject to the HYPERLINK > "http://docs.yahoo.com/info/terms/"Yahoo! Terms of Service. > > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.289 / Virus Database: 265.4.6 - Release Date: 12/5/2004 > > > > -- > No virus found in this outgoing message. > Checked by AVG Anti-Virus. > Version: 7.0.289 / Virus Database: 265.4.6 - Release Date: 12/5/2004 > > > -- > No virus found in this outgoing message. > Checked by AVG Anti-Virus. > Version: 7.0.289 / Virus Database: 265.4.6 - Release Date: 12/5/2004 > > > > > > > Yahoo! Groups Links > > > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
