yes that diode is missing on my board there is a jumper right next to where the diode goes but nothing tells me to do anything with the jumper.
----- Original Message ----- From: "Gerald Pelnar" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, December 06, 2004 9:50 PM Subject: Re: [Repeater-Builder] MICOR LOW AUDIO > > ----- Original Message ----- > From: "David" <[EMAIL PROTECTED]> > > > > my repeater is a micor compu station I have used the following site to > make > > the connections between the repeater and the controller > > http://www.ccdx.org/zedyx/mods/micorbas.htm > > so audio coming from the micor is just low is there something I missed in > > making the micor into a repeater? > > Was this originally a base station? If so did you remove CR957 from the RX > interconnect board. Check this link. > > http://www.repeater-builder.com/rbtip/micorrxintcon.html > > Gerald > > > > > > > Yahoo! Groups Links > > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
