Revival!
Sorry, My nutscrape account decided to bounce all the emails from the
reflector for the past 2 days.
To answer some questions:
This is an RC-850 with the VRT and Autopatch boards installed, no CIB
or front panel.
The repeater is on 146.64 TX, 146.04 RX.
I am presently using the same power supply as the radios which is a
Triplite PR-40. I do have the digital ground and analog ground tied
together on the controller end and the ground difference diodes inside
the controller are shot.
I have the lids on. Autopatch is not connected to a line at the moment.
I did notice that the controller dead carriers 146.76, and noise from
hell all up and down the 2M band from just being near the controller..
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
