If it's an "N" connector check for any twist between the connector and the coax. Any twist means a poor connection for repeat service no matter the coax type.
Paul Paul Finch WB5IDM Azle, Texas 147.16 Mhz CTCSS 110.9 442.15 Mhz CTCSS 110.9 -----Original Message----- From: Joe [mailto:[EMAIL PROTECTED] Sent: Tuesday, December 14, 2004 6:18 AM To: [email protected] Subject: Re: [Repeater-Builder] Cursed Coax What are your problems/symptoms? Good quality RG-213 cable may work well on a repeater system that has good quality duplexers and cable connectors. The single shield only seems to make a difference when you have marginal isolation in your system and every dB counts. 73, Joe, K1ike --- DCFluX <[EMAIL PROTECTED]> wrote: > > Has anyone had to remove a piece of RG-213 from > service? If so for > what reasons? I think I got a cursed piece between > my duplexer and > antenna. Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
