Well I can only relate my experience,worked for an RCC and used hundreds of their xtals and installed them in Icoms ourselves and had very few problems with temp comp.When we did,it was cured by replacing the Icom.The only company that truly does good element comp is ICM.
Mathew Quaife wrote: >Well can't say that I have ever went to a Mountain top, no mountins in >Indiana, (grin), but it's like the difference between AES and RandL buing a >radio, nearly $100.00 to $200.00 difference on the price. One of the reason >I ask what kind of quality they produce. > >Mathew > > > > >> Question ... >> >> Will Bomar do a temperature run on your crystal oscillator module >> - change the temperature compensation components to enable the >> crystal to stay on frequency from winter to summer temperatures? >> >> Will Bomar guarantee it too? >> >> I will let you answer these questions. >> >> Sure, you can get by on cheap - maybe. >> >> Have you ever made a trip to an icy mountain top in the dead of >> winter to put a cheap crystal back on frequency? I think not. >> >> Neil McKie - WA6KLA >> >> >>Mathew Quaife wrote: >> >> >>>What about Bomar Crystals? They will manufacture crysals for >>>$10.00 as to where everyone else charges from $15.00 to $20.00. >>>Has anyone used them before and how are there xtals. >>> >>>Mathew >>> >>>----- Original Message ----- >>>From: "Neil McKie" <[EMAIL PROTECTED]> >>>To: <[email protected]> >>>Sent: Saturday, December 18, 2004 2:50 PM >>>Subject: Re: [Repeater-Builder] Mitrek >>> >>> >>> >>>> One of the reasons I always go to >>>> International Crystal Manufacturing Co, Inc. in Oklahoma City, >>>> Oklahoma. http://www.icmfg.com 800-HAM-XTAL (800-426-9825) >>>> >>>> Hope this helps, >>>> >>>> Neil - WA6KLA >>>> >>>> >>>> >>>> > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
