At 05:41 PM 12/22/2004 -0500, you wrote: >the controller I have already lets me use pl on the receive or not but I >would like to be able to turn it off on the output
<---That's your RC210, yes? Simply follow my suggestion in my last post and route Pin 701 to pin 1 of the port you're using for the Micor. Then program the Encode Control Line to be Active High (command *1021 1) and program your timer for the amount of time you want encode active during the tail (command *1007xx). Also, don't forget to program whether you want the Encode time to start after COS or after the courtesy tone with command *2088. Ken ------------------------------------------------------------------------------ President and CTO - Arcom Communications Makers of state-of-the-art repeater controllers and accessories. http://www.ah6le.net/arcom/index.html We now offer complete Kenwood TKR repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/