OK, a night's rest & a fresh view can do wonders!! Looking at the Allied catalog, I see that they list ALL chokes in "uH" (micro-henries).
As previously stated, I need a 2.2 mH choke. Looking near the end of thier list, I found a listing for 2.2K!! I guess I thought it would say "2200 uH" or "2.2 mH" & I wasn't paying close enough attention to realize how they were using that "K". I'm embarrased. thanks to everyone! ------ Original Message ------ Received: Thu, 23 Dec 2004 07:32:10 AM CST From: "Ricardo Trujillo" <[EMAIL PROTECTED]> To: <[email protected]> Subject: RE: [Repeater-Builder] Did measurement of inductors change??? > > > John, > Those chokes are a lot smaller than what you need, they are specified in > microhenrys, the mh you need is millihenrys. > Ricardo W3/HK4BHA > > -----Original Message----- > From: JOHN MACKEY [mailto:[EMAIL PROTECTED] > Sent: Wednesday, December 22, 2004 9:40 PM > To: [email protected] > Subject: [Repeater-Builder] Did measurement of inductors change??? > > > > I need to build a filter and it requires I have a few chokes of 2.2 mH > value. > So I look in the Newark & Allied catalogs and all the chokes I am seeing > are labeled > > "�H" (a "u" with a tail on the left) > > rather than > > "mH" > > Was I asleep for a long period of time & they changed how > inductors/chokes are labeled or am I missing something else? > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
