Thanks, I reset the band to 4800 then back to 9600 and all worked great.
Thanks to everyone on the list who helped solve my problems.
Bill
----- Original Message -----
From: "Mathew Quaife" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Sunday, December 26, 2004 12:10 PM
Subject: Re: [Repeater-Builder] Controller Problems
>
> Look at your baud rate, make sure it is set to the correct speed. If the
> RLX gets garbaged up, that is all you will get, and you will have to do a
> master reset on the RLC contoller to get it to work again. A common
> problem
> on the RLC controllers.
>
> Mathew
>
>
>
>
> I tryed a few things usggested on the GM300 set up this morning,
> (jumper placement, etc.) now when I fire up Procomm, all I can
> recieve from the RLC-4 is a bunch of ASCII charictures!!! I must
> have changed some setting in Procom? i get ASCII chaictures for 137
> (�), 162(�), 085 (U), 083 (S),115 (s), and 162 )�), instead of the
> DTMF> prompt, any suggestions? I have tryed resetting the controller
> and Procomm.
> Bill
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
