Joe Montierth wrote:
>
> --- "Jim B." <[EMAIL PROTECTED]> wrote:
>
>
>
>>The last shop I worked for supplied 50-60 or more
>>TK350's to a local mfg
>>plant, using MII's and later TKR-820's, with one RCA
>>1000 rptr for a
>>while. There was never any problem like you're
>>describing.
>>But looking at my book, you're right. Tone is
>>applied to pin 6 of IC207,
>>which is the mic limiter.
>>
>>--
>>Jim Barbour
>>WD8CHL
>>
>>
>>
>
>
> But that's not subaudible tone, I think it's tone
> burst or DTMF.
>
> PL tone is applied to pin 6 of IC 201, the buffer amp-
> the last thing before the modulator. This is several
> stages after the limiter.
>
> Joe
Oh, yeah-you're right. I got lost in the D/A convertor earlier ;c}
Been a while since I worked on a 350...almost 8 years now...
--
Jim Barbour
WD8CHL
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
