--- In [email protected], Eric Lemmon <[EMAIL PROTECTED]>
wrote:
> Rob,
>
> The input impedance of either the front panel mike input, or the
> external mike input on Pin 2 of the Accessory Connector, is 560
ohms.
> Both inputs are factory-set at 14mV for 3kHz deviation, but the
gains
> can be adjusted in CPS.
>
> The above information was found in Paragraph 2.3.2 of the CDM
Detailed
> Service Manual, 6881091C63.
>
Thanks Eric. I'll check with the local radio shop and see if they can
adjust it for me. I don't want to start modding the patch unit at
this stage, but if necessary can do so down the road.
Thanks again -Rob-
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
