|
Yes, Mike - they work quite
well, if tuned up properly. I’m
currently running one as a back-up unit for my 444.550 machine. If you need the tune-up
pages from the manual, let me know. Mark – N9WYS -----Original
Message----- Mike, they move quite
easily, I tuned one down to 449.275 and it still had good sensitivity. All
I had to do is readjust the VCO voltages and retune the front end of the
receiver. You will have to interface the controller through the 25 pin remote connector.
(If it has one) I have a page from Zetron explaining where to get the
signals from if you need it. I also have scanned a manual (quite a lot of megs
if I remember right) that I'll offer if you have a high speed connection. Art - KC7GF Yahoo! Groups Links
|
