w9mwq wrote:

>Just want to get some input on what users think.  I have the option 
>to mount a DB224 on the top of a tower or side mounted at the top, 
>which would be best, in regards to noise verses stability, etc.....
>

I top mounted a brand new DB-224E on top a 200 foot tower about 7 years 
ago.  It broke just above the top clamp after being up only about 6 
months.  I have several other 224's in service elsewhere, some top 
mounted and some side mounted.  Most of these have seen 10 + years of 
service, with no failures. 

[Personal Opinion]   Fiberglass arrays like the Sinclair SRL-229 or 
super stationmaster give better omni directional coverage when top 
mounted, but they can break or be destroyed by lightning, although when 
mounted with a Static Buster lightning is less of a concern. Side 
mounting is always better for mechanical stability because you can 
support the middle and/or top of the array.  Side mounting a dipole 
array can allow you to tailor the coverage area, if desired or required, 
and protects the antenna from lightning to some degree.

BTW:  I have never seen a failed Sinclair SRL-229 that has been SB 
equipped.  I have seen Stationmasters hit so hard it blew the decoupling 
sleeve (aluminum mount) down through the double clamps like someone hit 
it with a 500 lb. sledge hammer.

YMMV.

Kevin Custer





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Reply via email to