Just what the doctor ordered. Thanks Juan.
Su respuesta trabajada muy bien. �Qu� estado usted vivo adentro? Tengo familia en GTO, MX Gracias otra vez mucho. skipp > XE2SI <[EMAIL PROTECTED]> wrote: > Looks that you have an old repeater, the new ones > have that pin called TOR wich is what you want, > if this is the case there is a small square island in the > controller board near the IC11 ( pin 9 ), this > change state when there is a valid "PL" received, > maybe you will need a buffer for what you need. > hope this helps. > Juan > ----- Original Message ----- > From: skipp025 > To: [email protected] > Sent: Monday, January 10, 2005 6:27 PM > Subject: [Repeater-Builder] TKR820 (tkr-720) COR logic (pin > 13)informationwanted. > > Hello there, > > Anyone have information to configure the COR output > logic on the Kenwood TKR820 Repeater to ctcss only? > I'd like to make pin 13 (COR) of the accessory > connector change states with a valid received ctcss > tone. > > As received, accessory pin 13 (COR) changes state > with carrier squelch activity. This tidbit of knowledge > seems to be a rather elusive animal. Maybe one of you > has done this already? > > Thanks in advance for your reply. > > cheers, > > skipp > skipp025 at yahoo.com Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
