I recently had a series of emails with Mary that were totally unproductive. The source of my information originally came from the owner and engineer of the company several years ago - Daniel Kaegebein.
Chuck WB2EDV ----- Original Message ----- From: "Paul Finch" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, January 12, 2005 2:18 PM Subject: RE: [Repeater-Builder] connectors > > Hmmmmm, sounds like he said she said! > > > > -----Original Message----- > From: russ [mailto:[EMAIL PROTECTED] > Sent: Wednesday, January 12, 2005 1:00 PM > To: [email protected] > Subject: Re: [Repeater-Builder] connectors > > > > NOT True. Mary Brown of TX/RX will tell you that is why they are changing > from Crimp to solder on for all there inter connect cables. Lots of the > noises goes away. > > ----- Original Message ----- > From: "Chuck Kelsey" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Wednesday, January 12, 2005 11:54 AM > Subject: Re: [Repeater-Builder] connectors > > >> >> I agree and so does TX/RX Systems, makers of some really nice duplexers > and >> other good stuff. Their research showed that a properly applied crimp >> connector was superior in every aspect. >> >> Chuck >> WB2EDV >> >> >> >> ----- Original Message ----- >> From: "Gregg R. Lengling" <[EMAIL PROTECTED]> >> To: <[email protected]> >> Sent: Wednesday, January 12, 2005 11:30 AM >> Subject: Re: [Repeater-Builder] connectors >> >> >> > >> > I dissagree...crimp on connnectors (of course you solder the center >> > pin) >> > are >> > probably the best and most replicable connections made. We did a lot >> > of >> > government/military work over the years and it was required to use >> > crimp >> > type connectors on flexible cables. They determined that it was easier > to >> > inspect and was more reliably done. When you have someone using >> > clamp/solder connectors, everyone is different. >> > >> > Gregg R. Lengling, W9DHI, Un-Retired >> > K2/100 SN 3075 >> > http://www.milwaukeehdtv.org >> > >> > ----- Original Message ----- >> > From: "russ" <[EMAIL PROTECTED]> >> > To: <[email protected]> >> > Sent: Wednesday, January 12, 2005 10:30 AM >> > Subject: Re: [Repeater-Builder] connectors >> > >> > >> >> >> >> Hello All, >> >> I would NEVER use crimp for any thing to do with duplex. Like a > repeater, >> >> They will work OK (crimp) for test cables and the crimp connector is >> >> easier >> >> to install but you can not beat a good solder on clamp connector! >> >> 73 Russ, W3CH >> >> >> >> ----- Original Message ----- >> >> From: "Paul Holm" <[EMAIL PROTECTED]> >> >> To: "Repeater Builder Reflector" <[email protected]> >> >> Sent: Wednesday, January 12, 2005 10:05 AM >> >> Subject: [Repeater-Builder] connectors >> >> >> >> >> >>> >> >>> I'm going to be making up some jumpers for test leads and repeater >> >>> interconnects with RG-400 using BNC and N connectors. I'm wondering >> >>> what >> >>> folks have had best results with: crimp style or clamp style > connectors. >> >>> What is more appropriate for this type of cable? Is one style more >> >> reliable >> >>> or easier to assemble? Thanks. >> >>> >> >>> 73 Paul >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> Yahoo! Groups Links >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> >> >> >> >> >> >> >> >> >> >> >> >> >> Yahoo! Groups Links >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> > >> > >> > >> > >> > >> > >> > Yahoo! Groups Links >> > >> > >> > >> > >> > >> > >> > >> > >> >> >> >> >> >> >> >> Yahoo! Groups Links >> >> >> >> >> >> >> > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
