There's been some good input as far as connector style. I guess a follow-up
question that comes to mind would be, how do people feel about silver vs.
nickel/USA vs. import? Thanks all.
Paul
----- Original Message -----
>
>
> I would recommend the clamp type of connectors. That way you don't
> need to get special tools to do the crimping.
>
> The only tools needed for the clamp type are for stripping the cable,
> measuring the cable to strip and cut it, cutters to trim the shield
> and the center conductor. And a couple of wrenches to tighten the
> clamp.
>
> Voila! You are done.
>
> And after enough of them, you won't even need to measure the cable for
> cutting and trimming. Calibrated eyeball does wonders. :-)
>
> ka0ies
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
