[EMAIL PROTECTED] wrote:
> As for the crimp or clamp style connector. If you look at many
> combining system you will notice that 95% of them use the CLAMP style
> connector. There must be a reason that MOST of the engineers for the
> companies prefer CLAMP over CRIMP. hmmm there must be a reason. I
> know that out of all the site we have here in the North West we use
> nothing but CLAMP.
>
> Mike K7PFJ
<more major snippage>
Again, not true. The vast majority of them are CRIMP now. Motorola
recommends them. M/A-Com recommends them. TX/RX does. Sinclair does.
Scala does. etc, etc, etc...
(Also it's not recommended to use 'N' connectors at power levels above
100W above about 200 Mhz, but that's another issue.)
--
Jim Barbour
WD8CHL
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
