Hi Sean,
Have you tried placing the transmitter into a
load/termination, then observe if the problem
changes?
Also later testing with the cover(s) off, does
the spur go away when you pull the tx element
to stop the transmitter?
How much power is output from the tx?
Do you have a circulator/isolator in line?
skipp
> "maxjam_99" <[EMAIL PROTECTED]> wrote:
> I have a vhf mitrek that has been split for repeater
> operation. It has work flawlessly until now.
> When the TX is unkeyed the transmitter will stay
> keyed for approx 10 seconds. During this time it
> generates a wide signal +-1Mhz centered on the TX
> frequency with full power out.
> Once 10 seconds or so it will unkey and cease tx'ing.
> If you key the TX during the time it is generating
> this wide signal then it will TX a proper clean
> signal, unkey and start over.
> Any thoughts?
> Thanks...
> Sean / N�PBA
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
