On Jan 24, 2005, at 18:28, w9mwq wrote:
>
>
> Ok, I know this sounds silly, but my repeater is now hearing better
> than it transmits. Here's the setup, the the issue. I have a
> Maggorie (no comments) HiPro transmiitter running 2 watts into a
> Vocom Amp running 160 Watts into the duplexer, 130 out to the
> antenna, fed with 7/8" hardline into a Diamond Dual Band Antenna at
> 92'. VSWR is 1.1:1, with 130 watts forward and 1/10 watt reflected
> at an impedance of 52 ohms, (MJF 259).
I would vote for a failure of the Diamond antenna. I would bet one or
more sets of the set screws holding the elements together have come
loose. When this happens, the antenna will still present a perfect 50
ohm load, but perform poorly. Diamonds are okay antennas when they are
new, but they have to be taken down every year or two, disassembled,
cleaned and tightened up. Really only a decent antenna if you can get
to it conveniently for the annual repair. You will never see this type
of failure with the wattmeter or impedance bridge.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/