Thank you. The RBI-1 drawing was very difficult to read but I was looking at the same thing. Your detail confirms this. Thank you for clearing up what the RBI-1 drawing really said.
--- In [email protected], Sean Fitzharris <[EMAIL PROTECTED]> wrote: > > Here's the data I extracted from the two manuals. I just had a friend > (NT6S) verify this pinout with a factory PG-4H. > > 73, > Sean W6MOW > > RBI-1 RJ-45 Kenwood 8 PIN > --------------------------- > 7 - TXA_KW 1 - MIC AUDIO > 5 - PTT_KW 2 - PTT > 4 - DOWN_KW 3 - DWN > 1 - UP_KW 4 - UP > 3 - +B_KW 5 - 8 VDC > 6 - RD-kw 6 - RX Audio > 8 - COMGND 7 - GND (MIC AUDIO) > 2 - COMGND 8 - GND > > > > > On Mon, 24 Jan 2005, Ken Arck wrote: > > > > > At 02:31 AM 1/25/2005 -0000, you wrote: > > > > >I know but I have all of the parts here ready to solder and the radios > > >are built into such a cool rack mount panel. I really want the cables > > >to be an exact length and dressed so nicely. Besides with the correct > > >pinout I could be done in an hour instead of waiting weeks for the > > >shippment. > > > > <---Take a look at the RBI manual and schematic. It has the pins on the > > RJ45 labeled as to function. Then check the Kenwood manual and the > > connections should be quite obvious. > > > > That's how I did it and it works fine. > > > > Ken > > ------------------------------------------------------------------------------ > > President and CTO - Arcom Communications > > Makers of state-of-the-art repeater controllers and accessories. > > http://www.ah6le.net/arcom/index.html > > We now offer complete Kenwood TKR repeater packages! > > AH6LE/R - IRLP Node 3000 > > http://www.irlp.net > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
