Ken, speaking of the Kenwood remote bases, do you manufacture a board, or a kit for the remote base interface for the G707's etc? If so, how much.
Also, has any consideration been made of developing a USB port programming solution? My laptop does not have a serial port! :-( Mike Ken Arck wrote: > At 02:31 AM 1/25/2005 -0000, you wrote: > > >>I know but I have all of the parts here ready to solder and the radios >>are built into such a cool rack mount panel. I really want the cables >>to be an exact length and dressed so nicely. Besides with the correct >>pinout I could be done in an hour instead of waiting weeks for the >>shippment. > > > <---Take a look at the RBI manual and schematic. It has the pins on the > RJ45 labeled as to function. Then check the Kenwood manual and the > connections should be quite obvious. > > That's how I did it and it works fine. > > Ken > ------------------------------------------------------------------------------ > President and CTO - Arcom Communications > Makers of state-of-the-art repeater controllers and accessories. > http://www.ah6le.net/arcom/index.html > We now offer complete Kenwood TKR repeater packages! > AH6LE/R - IRLP Node 3000 > http://www.irlp.net > > > > > > Yahoo! Groups Links > > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
