well the program runs on my computer. somehow on the one R100 when you go to read the chips to program them it comes up with check sum error. this is one on the one repeater I need to program it is a DPL unit. any thought on how to get around this?
----- Original Message ----- From: "Brian Poellnitz" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, February 02, 2005 12:06 AM Subject: Re: [Repeater-Builder] Re: motorola R-100 repeater > > Best thing to try : > > Get the MoSlo program here... http://www.hpaa.com/moslo/ > Use it at the default speed (IBM PC/AT 4Mhz). This should allow the > R100.com program to run on most any system. If it still won't run, > DISABLE CACHE in your CMOS setup and try again. > > Also, if you're dealing with a 450 split R100, you will probably have > to hex edit the R100.com file to modify the allowable bandsplit. > Directions to do so are here... http://www.batlabs.com/r100.html > > Good luck & hope this helps. > > Brian, N4BWP > > --- motarolla_doctor <[EMAIL PROTECTED]> wrote: > >> >> >> --- In [email protected], "Maire Company" >> <[EMAIL PROTECTED]> wrote: >> > had to reload the software into the computer. >> > now when I go to read the repeater on rx or tx I get the same >> error. >> > after it go thought read 1, 2, 3,and 4 when it gets to 5 it comes >> >> up with a check sum error. any thoughts help >> > thanks >> >> Your computer may be way too fast, the R100 s/w is OLD, and does not >> run correctly on any faster than a old 286 10mhz with DOS 5xx or 6.0. >> >> You could also have a bad EEProm, or bad data in it, common problems. >> >> >> >> >> >> >> >> >> Yahoo! Groups Links >> >> >> >> >> >> >> >> > > > > > __________________________________ > Do you Yahoo!? > The all-new My Yahoo! - What will yours do? > http://my.yahoo.com > > > > > > Yahoo! Groups Links > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
