I always fax the info to them. always freg, radio type model all info them need.
----- Original Message ----- From: "Coy Hilton" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, February 07, 2005 8:43 PM Subject: [Repeater-Builder] Re: Mastr II Rx Freq Drift > > > I ordered 7 crystals from Bomar in December on the phone. When I > received the order they had gotten a repeater pair reversed IE the > pair was for a link radio on a repeater, what I actually got was the > crystals for the repeater frequency, the Tx and Rx frequencies were > reversed. When I called they said that I had made the mistake and > that they would be glad to make the crystals that I needed for 10 > bucks each. SAY WHAT? SO BOMAR is on my nasty list. Great customer > no service!! > > --- In [email protected], "Maire Company" > <[EMAIL PROTECTED]> wrote: >> At one time I had ICM make me some for Motorola HT-210 and HT-90. > They >> worked ok in Florida but when we took them to Gatlinburg TN in > winter almost >> all the radio's had problems of being off Freg. never ordered > from them >> again. Been using Bomar for many years for repeaters and HT-500 > and GE >> mobiles with no problems. >> >> that is my 2 cents. John >> >> >> ----- Original Message ----- >> From: "Bob Dengler" <[EMAIL PROTECTED]> >> To: <[email protected]> >> Sent: Monday, February 07, 2005 7:06 PM >> Subject: Re: [Repeater-Builder] Mastr II Rx Freq Drift >> >> >> > >> > At 2/7/2005 12:19 PM, you wrote: >> > >> >>I recently rebuilt my 440 repeater and got away from the Mastr > II mobile >> >>w/ tripler PA and went to a Mastr II Station. As a part of the > upgrade, I >> >>sent a set of 2C icoms to International Crystal and had them > recrystaled >> >>to my frequency. It has been on the air since the end of > December. When >> >>I first put in on, everything was great. After about 2 weeks, I > couldn t >> >>get into it anymore. After some experimenting, I found that if > I tuned >> >>down from 449.325 (rx freq) to 449.310 I could bring it up. > Went back to >> >>the site with the service monitor and put it back on frequency. > That was >> >>3 weeks ago. A few days ago, can t bring up the repeater. I > tried at >> >>449.320. Bingo! There it is. >> >> >> >> >> >> >> >>My question& Is it normal for a crystal to drift that much > over the >> >>first month or so? I don t remember having this problem before > but it s >> >>been a while. No, the building is not climate controlled but is > insulated >> >>very well and the temperatures have been pretty mild around here > lately. >> > >> > Although crystals do age a very small amount, it's not normal > for it to >> > move this much. Sounds like some contamination got inside the > can. >> > >> > For as much as ICM charges for crystals these days, you should > have no >> > problem getting a replacement from them at no charge. >> > >> > Bob NO6B >> > >> > >> > >> > >> > >> > >> > >> > Yahoo! Groups Links >> > >> > >> > >> > >> > >> > >> > > > > > > > > > > Yahoo! Groups Links > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
