Hi Rick,
I have the paperwork for both units in my hot little hands. If you can wait until Tueday, I'll scan it into pdf and make copies available for gratis (free). This is the Spectrum TX unit I have/had a love hate relationship with for over a decade. Spectrum doesn't put rf rated caps in the pa section of the transmitter. The [EMAIL PROTECTED]& low dollar trimmer caps they use don't handle RF well. I replaced all the rf section caps with rf rated units and the unit has never farted since. Spectrum is not the only company that makes this mistake. The PA was sold as a 75 watt VHF, 65 watt 224 Mhz value, but you'd do well and be happy to have 50 watts output with the attached transmitter. It's very clean and stable, nominal drive is about 5 to 10 watts. I'll send you the paperwork free, if you don't keep the tx strip, consider selling it to me for a spare. Email me off the list direct if you like. cheers, skipp skipp025 at yahoo.com [EMAIL PROTECTED] > "Rick & Charlotte" <[EMAIL PROTECTED]> wrote: > THANKS !!!!!!!! > I am only interested in ther PA itsself > as I am using the micor as my > 220 repeater but if the price is > right might have to look into getting > spare parts tx and rx :) > let me know off list .. thanks > Rick > > > > On 19 Feb 2005 at 10:30, [EMAIL PROTECTED] wrote: > > Hello, > > I posted the manual for the SCR-77 > > repeater that used the SCT110 > > transmitter at: > > http://groups.yahoo.com/group/Repeater > > /files/SCR77%20Repeater/ > > > > Look on page 19, I think the output of > > the SCT110 222Mhz board is 10 > > watts. the amplifier was advertised as > > a 70 watt amp, but Spectrum > > informed me years ago that the 222Mhz > > output was only around 50 watts. > > > > Ironically, I have an SCT110 and PA going > > on the bench in a few days > > that I am going to be testing before > > I put it on sale. I can confirm > > this if you want. > > 73, Joe, k1ike > > > > ---- Rick & Charlotte <[EMAIL PROTECTED]> wrote: > > ============= > > Hello all .. sorry for the x post but I > > need some help on this product > > Spectrum SCT 110 Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
