Bob Dengler wrote:
> 
> This is why SoCal is on an inverted 15 kHz bandplan in the 146-148 MHz
> range: every 15 kHz the offset is inverted, so in our bandplan you'd
> be on 146.325 (+) & the other system would remain at 146.91 (-).  Then
> your distant user would be TXing on 146.925 & not bother the input of
> the other repeater.

Note: This is not meant to be an argument with you personally, but
rather another way of looking at the issue.

No - you transfer the problem to users interfering directly with other
users, and since you have no control over where the users are, it makes
the problem four times as bad as users interfering with repeaters or
vice versa. At least repeaters are generally in remote locations where
the number of users in the immediate area are low. With users - they
live among other users - sometimes next door. So, in essence, you are
putting the potential interference closer together and in a group that
will be much more volatile when it comes to dealing with each other. At
least with the repeaters you can control, to a much greater extent, what
other repeaters will be interfering with their transmitted signals.

However, the fact that this has all of a sudden turned into an ADJACENT
CHANNEL issue rather than a CO-CHANNEL issue does put the entire
situation, and the entire first round of comments, in a different light.
There apparently is no coordination (or mis-coordination) issue involved
as some had previously surmised when it was thought to be co-channel
repeaters.

Joe M.





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Reply via email to