Run COR into a 555 pin 2. Invert pin 3 of 555 with 2n2222. Run collector
of 2222 for xmit PTT. Need 3 resistors, 2 caps, 1 diode, 1 555, 1 2N2222.
Look at any 555 timer circuit. Put diode from pin 7 pointing to pin 2.
(Actually, use COR not.)
Of course this doesn't address the time-out of ID issues.
Al, K9SI
Date: Wed, 02 Mar 2005 19:17:55 -0000
From: "kc7lpp" <[EMAIL PROTECTED]>
Subject: MaxTrac as a Repeater
I setup my two MaxTrac as a Repeater and it works fine. But I have
no hang time after I transmit like i need the TX to stay keyed up
for 1 or 2 seconds after transmitting. Does anyone know how I can do
this in the radio programming?
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
