Hi Skipp,if you stll want it,$50 shipped. I just found out I will be
forced to go on disability due to back problems,so everything will have
to go. 73,Lee
skipp025 wrote:
>Yep,
>
>A specific callsign and operational changes are
>noted using the book information. The changes
>are programmed into an eprom, which plugs into
>the socket adjacent to the factory eprom/firmware.
>
>I will program the eprom (for free) if you supply
>the chip, the program information and a prepaid
>SASE Mailer with proper postage. Email me direct
>if you have questions.
>
>There are three different manuals for the ITC-32,
>depending on vintage. One or two are quite complete,
>the remainders are minimal get started instructions.
>
>I've alread shared some of the firmware "tweaks" made
>by Hams running ITC-32 controllers for years. If
>you're serious about running the ITC-32, I might be
>coaxed to again provide that information free.
>
>cheers
>skipp
>
>skipp025 at yahoo.com
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
