How did you know that what I have ??
I will let the group know when this is done
Rick
On 9 Mar 2005 at 9:43, Jim B. wrote:
>
> John Everson wrote:
> >
> > --- In Repeater-Builder@yahoogroups.com, "Rick & Charlotte"
> > <[EMAIL PROTECTED]> wrote:
> >
> >>I am running one of these amps right now
> >>
> >>with around 100mw drive I am getting around 55 watts at 224.420
> >>
> >>stable output with no spurs
> >>
> >>I did not need to do a lot of mods at this point I use the
> >
> > controller to
> >
> >>run the PTT on the amp as there is no RF switch to do this funtion
> >>on the amp itself .. I have ordered a rack for this amp and willsee
> >>what in it to this job .. I will post more info as I move forward
> >
> > in this
> >
> >>project
> >>
> >>Rick
> >>
> >>
> >
> > Right On Rick,
> >
> > It's good to hear that you have the amp up and running. Nice that
> > you were able to do what I was never able to get around to. 55 watts
> > with 100 Mw drive.... Awesome.
> >
> > 73 de John AB6LI
>
> Sounds like a good match for a converted Micor....hmmm...
>
> --
> Jim Barbour
> WD8CHL
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.7.0 - Release Date: 3/8/2005
>
========================
Rick Szajkowski VA3 RZS
Charlotte Darby VA3 CMR
Node Owners of IRLP Node 2120
147.300 + VE3 KZK
224.420 - VE3 KZK
Peterborough Ont. Canada
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
