Re: [Repeater-Builder] cable run radiating cable

[russ]

Hey John, You mite write to Dean Westbrook. He has done two subway systems using this Hard-Line type of coax and they even sent him to school on it. Neat stuff to use from the story I heard. I am not sure how close he is monitoring the list over there. They are closing out a very large job. 73, Russ   ----- Original Message ----- From: Maire Company To: Repeater-Builder@yahoogroups.com Sent: Tuesday, March 15, 2005 4:48 PM Subject: [Repeater-Builder] cable run radiating cable what do you guys know about the installation of radiating cable for a repeater in a building.  I have a 5 story building and sub basement.  So it is like 6 stories.  Thinking of putting the repeater in the lower level and installing the cable up to the roof.  On  the roof thinking a DB-408.  (or would a dummy load be used)  This would be a UHF repeater  possible 2 watts or other low power use.  The goal is to cover the floors as there are a lot of cement and metal.  At this time they have a repeater on the roof but the lower floors are dead and there is very little receive in the sub basement.  The current repeater is 40 watts. No preamp.   Or any other thoughts would help.    John Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/   To unsubscribe from this group, send an email to: [EMAIL PROTECTED]   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.