Re: [Repeater-Builder] Hyper Terminal

[N�ATH]

Title: RE: [Repeater-Builder] Hyper Terminal

Datastorm of Columbia Missouri originally wrote  Procomm. They have been out of business for probably 10 years+- . Is there another source for it? I use it on an old laptop for programming with 3.1 and works fine. Was wondering the differences in Plus? Dave / N�ATH   ----- Original Message ----- From: Rogers, Ron To: Repeater-Builder@yahoogroups.com Sent: Saturday, March 19, 2005 2:15 PM Subject: RE: [Repeater-Builder] Hyper Terminal Procomm or ProcommPlus is used pretty widely for packet TNC control and programming the ACC controller equipment. Ron WW8RR -----Original Message----- From: Don [mailto:[EMAIL PROTECTED]] Sent: Saturday, March 19, 2005 12:21 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Hyper Terminal I have a Digital audio recorder that is Programmed by the PC But I did see this Note, The device may not Program Properly with the HyperTerminal program that comes with Microsoft Windows all versions, So the question I have What else is around that I could try, Any info will be greatly appreciated. Thanks Don KA9QJG Yahoo! Groups Links <*> To visit your group on the web, go to:     http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to:     [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to:     http://docs.yahoo.com/info/terms/   Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/   To unsubscribe from this group, send an email to: [EMAIL PROTECTED]   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.