Will do! Gone with just the  Wp-643's nothing else.
Thanks again for the info and of course the RPTIP info. which if I read or
not I tend to always miss what im looking for.
73's
Brent
----- Original Message -----
From: "Eric Lemmon" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Monday, March 21, 2005 9:59 PM
Subject: Re: [Repeater-Builder] Desense, I'm guessing?


>
> For those who may not have the Wacom catalog handy, the WP-643 duplexer
> comprises six 8"  cavities that are rated at 102 dB isolation at 600 kHz
> spacing, with 2.2 dB insertion loss.  Four of the cavities are BpBr, and
two are
> bandpass only.  The WP-639 duplexer comprises four 5" BpBr cavities that
are
> rated at 80 dB isolation at 600 kHz spacing, with 1.5 dB insertion loss.
> Needless to say, the WP-643 is vastly superior to the WP-639 at 2m
spacing.
>
> You could use two of the WP-639 cavities for bandpass application, if you
> replaced the single BpBr coupling loop with two Bp loops on each cavity.
Try
> the WP-643 in stock form first.
>
> 73, Eric Lemmon WB6FLY
>
> Brent wrote:
>
> > With yours and Kevin's reply,  I have decided to go with a set of
WP-643s
> > and not use the WP-639s.   I believe this would get me going, and if I
need
> > the pre-amp, then I will add it along with the pass cavities.
> >
> > One more quick question:  Since I have the set of 639s here, what would
the
> > effect of two cans from the 639s be if added to the 643's receiver side-
> > besides the loss?
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
> ---
> [This E-mail scanned for viruses at TNWEB LLC]
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 3/18/2005
>
>



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 3/18/2005

---
[This E-mail scanned for viruses at TNWEB LLC]





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Reply via email to