I used to breadboard all my controllers using 2N3711, 2N3702 and 4066 bilateral switches, a capacitor for RC repeater tail and I had about 5 buck and a couple hours in it installed. Had plenty of surplus CW ID'ers and had a repeater on-line for less than 40 bucks including radio and crystals. I now am using a MCC controller in both my repeaters but am looking seriously at a NHRC, I have five repeaters to build in the next 6 months.
Paul -----Original Message----- From: John [mailto:[EMAIL PROTECTED] Sent: Wednesday, March 30, 2005 12:52 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Re: Controler Question Bob, if you really want to go low cost, you can wire a simple transistor switch from the unsquelch indicator of one radio to the PTT of the other and use one of the $8 K1EL CW ID chips to keep you legal. 73, John, K9KA --- In Repeater-Builder@yahoogroups.com, "Bob" <[EMAIL PROTECTED]> wrote: > > What is a good controler to buy,All i want to do is use two radios one > for TX and other for RX and connect another radio for a remote > base...I dont want phonepatch or voice id...just a cw id will > do....Bob/N2BR [EMAIL PROTECTED] Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
