I just looked at it, and yeah it is LDF1-50A. The reducers I had were
too small for it, I was debating drilling out the one for RG-8X but
then that would leave none of the reducer.
On Apr 8, 2005 3:01 PM, Roger Grady <[EMAIL PROTECTED]> wrote:
>
>
> At 04:21 PM 4/8/05, Mike Perryman wrote:
>
> >LDF is low-loss..
> >FSJ is standard..
> >and Super-Flex is as you describe below.
>
> Andrew calls LDF the "standard" cable, FSJ is Superflex (finer
> corrugations, can be bent to tighter radius and will stand more bends). FSJ
> has roughly 50% higher loss than LDF (at least in the 1/2" size and in the
> 150-450Mhz range that I compared). But even 1/2" FSJ has only 2.3 db/100'
> loss at 450Mhz.
>
> Roger Grady K9OPO
>
>
> Yahoo! Groups Links
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
