If your duplexer has been properly tuned for your repeater pair, you can exchange the high and low sides without any problems. Do NOT try to retune the duplexer; it's just fine the way it is. If it worked okay in a high-in low-out mode, you can swap sides when you change to low-in high-out operation.
73, Eric Lemmon WB6FLY "T.J." wrote: > I have a question for the group about flipping frequencies around on > a repeater. I think I know the answer, but I want to make sure before > I do or don't do anything. I'm going to swap around the transmit and > receive frequencies on a repeater. What I was wondering was, can I > just swap the transmit and receive lines between the duplexer and > repeater, or does the duplexer have to be retuned for the new reversed > transmit and receive frequencies? Thanks for and input that can be > provided, T.J. > > > > > > > --------------------------------------------------------------- > Yahoo! Groups Links > > * To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > > * To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > * Your use of Yahoo! Groups is subject to the Yahoo! Terms of > Service. > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
