DONOT use the 9-pin connector use the DB-25 contact me off the list and ill give you a dat file.
Oregon Repeater Linking Group Mike Mullarkey 6539 E Street Springfield, OR 97478 [EMAIL PROTECTED] www.orlg.org -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Jimmy Floyd Sent: Saturday, April 16, 2005 12:59 PM To: Repeater-Builder Subject: [Repeater-Builder] Club Deluxe and TKR-750 K2 Need the wisdom of the group. I am trying to interface a TKR-750 K2 to an RLC Club Deluxe controller. The radio is working fine and controller is known good. Have not been able to make interface. Here is pinout of cable that I have from controller to K2: DB9 pin ---------------------------> DB25pin 1 ground 7 2 PL i/p n/c 3 PTT Out 16 4 Audio output 9 5 Audio input 10 6 Ground n/c 7 COR 25 8 Ground 19 9 Ground 12 What settings in Kenwood software need to be on/off ----- ie: Aux in/out ---- if any. The internal K2 controller is working properly. Any help appreciated. Thanks Jimmy Floyd NQ4U www.mtndx.org Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
