Before you order crystals, I think you've got a little more homework to do: those two frequencies are pretty close together, so you will need good duplexer. Are those frequencies legal to use for repeater service; I realize this is not the place to discuss rules, but I think those are FRA frequencies, and I know nothing about how that works.
By the way, I recognize your name from the Pacific Locomotive Association list; I'm a (mostly) silent member of that organization too. I have a pretty full plate at the moment, but I do have an HP8920 service monitor and some experience (trustee and technical staff of AA6BT/R, 146.115+) that might be helpful; let me know off list at [EMAIL PROTECTED] or [EMAIL PROTECTED]
Bob U.
AA6BT
At 02:51 PM 4/18/2005, Don Pomplun wrote:
My Mastr II has 4 EC xmit icoms from 154.6 - 155.5,
and 4 EC rvc from 148 - 155.5
The 5C (in rcv slot #2) is 155.475
Our assigned freqs are 160.695 & 161.445
Does one order "new" icoms, or do you send a couple of the ECs in to get re-crystal'd?
What about the 5C? since I understand it's just for freq compensation, can it be left as-is, or does it need to be reset for somewhere around 160?
How much $$ am I looking at? I looked at the International Crystal site but couldn't find any icom reference.
TIA
Don
Yahoo! Groups Links
- To visit your group on the web, go to:
- http://groups.yahoo.com/group/Repeater-Builder/
- To unsubscribe from this group, send an email to:
- [EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Yahoo! Groups Links
- To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
