Dennis - to the best of my knowledge (and faulty memory!),
the three supplies (4EP38A10, A11, and A12) all have the
same connections on the top barrier strips. The differences
between the supplies are circuitry upgrades and the inclusion
of stuff like line amps and the like in the later versions.
Holler if I can be of further assistance.
73 de John
..
> I have a GE Mastr Pro Deskmate with the 4EP38A10 Power Supply. The
> question I have... are the barrier strips at the top the same pinouts
> for the TX/RX strips as the 4EP38A12 power supply? I have the 4EP38A12
> Schematic.
>
> I am wanting to hookup a controller and wanted to make sure I have the
> COS, audio, PTT, etc correct for wiring.
>
> Better yet if someone has a schematic for this unit that would also
> detail the barrier strip designations, please contatct me. I will pay
> for a schematic of this power supply.
>
> Thanks,
> Dennis / KB8YGC
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
