Be very careful, NEVER EVER plug in a GE meter backword into a MASTR
Pro and key the transmitter. The meter that our shop had, had the
key pins broken off....it's easy to do. That thing will knock your
pants off. It's okay though, you'll need to change them any how.
Yes ... it happened to me.
73
AC0Y
--- In [email protected], "Dennis Adams"
<[EMAIL PROTECTED]> wrote:
>
> Greetings,
>
> I have a GE Mastr Pro Deskmate with the 4EP38A10 Power Supply. The
> question I have... are the barrier strips at the top the same
pinouts
> for the TX/RX strips as the 4EP38A12 power supply? I have the
4EP38A12
> Schematic.
>
> I am wanting to hookup a controller and wanted to make sure I have
the
> COS, audio, PTT, etc correct for wiring.
>
> Better yet if someone has a schematic for this unit that would
also
> detail the barrier strip designations, please contatct me. I will
pay
> for a schematic of this power supply.
>
> Thanks,
> Dennis / KB8YGC
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
