A HAM friend of mine said he has a Mastr II Base Station I could use/have. Is this a better option than the mobile radio?
Thanks, Duane --- In [email protected], "Gary Laforce" <[EMAIL PROTECTED]> wrote: > You should one need one master II. But it will have to modify for full > duplex so do this as well as tuning it up completely on a vhf freq first > before starting the mods so that you know you are working with a good > unit. > > I have been a bench tech for years and that mod it not for someone that > is new to bench work (I don't say this to be disrespectful or in any way > I'm I try to put you down but if you haven't done this type of mod > before you may what to find and Elmer to help you please don't take this > the wrong way). > > NHRC make a good controller I have install a few of the 3's and 4's and > they work 100%. With a mobile master II you should be able to run up to > about 35 watts 100% duty with out a fan and you may ever get by with > 50watts with a couple of good fans on the heat sink of the PA. > > On a master II make sure that you put a 10 ohm 10 watt load resister on > the audio output or you will have an oscillation in you rx audio on the > same note make sure to not ground either side of the audio output lines > it is BTL audio or (floating) > > Hope this helps if you have more question or what ever fill free to > email direct > > Gary LaForce > Chariton Valley TriStar Communications > Columbia Service Department Supervisor > 573.441.2224 Direct Shop line > 573.442.1147 Main Business Line > 573.449.8310 Shop Fax line > [EMAIL PROTECTED] > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
