At 4/29/2005 11:36 AM, you wrote:
>skipp025 wrote:
>
> >Near the burning hot dog tent? :-)
> >
> >
>
>Yum... ahhhhhh I meant correct....
>
> >
> >
> >>Kevin Custer <[EMAIL PROTECTED]> wrote:
> >>I *believe* Repeater Builder will be in our
> >>regular spaces, 707 - 710, in the outside
> >>vending area.
> >>Kevin
Then we will see you in 3 weeks. Will be bringing 2 meter portapeater #2,
which I'm just finishing off (147.585 in/144.930 out, PL-141.3).
Speaking of which, I've run into one minor snag: I'm interfacing my Kenwood
TM-G707 to it as a remote base via the 6 pin packet connector (chosen
because all I/O I need is there: TX & RX audio, COS & PTT). I assumed the
TX packet audio input would be pre-emphasized inside the radio, so the
audio I'm feeding it is de-emphasized (what I call "flat"). However, the
707's TX audio from the portapeater sounds muffled. Is there no
de-emphasis on this audio input even when the radio is set for 1200 baud
operation, or is there some 2200 Hz LPF for the AFSK tones on that line? I
prefer not to run a haywire over to the mic connector if I can avoid
it. Thanks.
Bob NO6B
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
